User's Manual

12
Basic Operation
Preparing for Use
Before you can use your cordless telephone, you must charge the Handset for 12 hours. Failure to
do so will require recharging of the Battery Pack more often.
1. Place the Handset on the Base Unit for 12 hours.
2. After 12 hours, remove the Handset from the Base Unit.
NOTE: Depending on the frequency of use, once the Handset is fully charged, it remains
functional for approximately 7 hours of continuous use and approximately 10 days
when the Handset is off the Base Unit in Standby mode.
Making Calls
1. Press the button. “Talk” will display and the Call Timer
starts to count.
2. Wait until you hear a dial tone and then dial the phone
number.
3. When you have finished your call, press the button
again or place the Handset on the Base Unit. The duration
of the call will be displayed on the LCD Screen for about 3
seconds.
OR
1. Dial the phone number.
2. Press the button. The number displayed will be dialed.
3. When you have finished with your call, press the
button again or place the Handset on the Base Unit. The
duration of the call will be displayed on the LCD Screen for
about 3 seconds.
Handset Volume Control
1. To adjust the Handset receiver volume level while having a
conversation, press the /MENU button. The LCD
Screen will display “Volume setting.”
2. The default setting is “Low”. Press the Scroll Up or
Down button to select the desired setting of Low,
Medium, High or Maximum.
TALK
TALK
TALK
TALK
VOL
Man PM3320.qxd 2/25/2004 11:20 AM Page 13