User Manual

1. Button: Press and hold down to record memo messages.
2. Button: Press to set/check the day and time.
3. (OUTGOING MESSAGE) Button: Press and hold down to record OGM messages.
4. Button: Press to erase messages.
5. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
6. SPEAKERPHONE LED Indicator: Lights up when the BASE UNIT speakerphone function
is activated.
7. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in
TALK mode. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for
charging.
8. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the answer
function is turned ON.
9. MICROPHONE
10. (ANSWER FUNCTION ON/OFF) Button: Press to activate or deactivate the answer
function.
11. Button: Press to PAGE the HANDSET. Press again to stop.
12. Button: Press and hold to set the 3-digit Remote Access Code for remote operation.
13. MESSAGE ALERT: Set switch to ON to generate a “beep” sound every 12 seconds when a
new message has been received.
14. ANNOUNCE ONLY/INCOMING MESSAGE Switch:
ICM - System records the incoming messages.
ANNC - System plays your announcement and then hangs up without recording messages.
15. RINGER ON/OFF Switch: Set switch to OFF position to disengage the ringer on the BASE
UNIT.
16. RING SELECT Switch: To select the number of rings before the Answering System answers
a call.
3R - System answers a call after the third ring.
5R - System answers a call after the fifth ring.
TS (TOLL SAVER) - System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.
17. (MAILBOX 1) Button: Press to activate functions for MAILBOX 1.
MEMO
BASE UNIT Controls
TIME
OGM
ERASE
ANS
ON/OFF
PAGE
CODE
MAIL
1
DSST~MAN4~9762.qxd 11/12/2002 2:46 PM Page 8