User's Manual Part 2

Multi-HANDSET, Multi-BASE UNIT System Operation
35
Transfer Call from HANDSET to BASE UNIT
1. During a call conversation, press the
button and KEYPAD button to page the BASE
UNIT user. The BASE UNIT emits a rapid sound. If
the BASE UNIT user does not respond, press
button again to return to the call.
2. The BASE UNIT user can press the /MENU
button to answer. An intercom link between the
HANDSET and BASE UNIT is established and the
call will be put on hold.
3. If the BASE UNIT user does not want to access the
call while in intercom mode, the user can press the
/MENU button on the BASE UNIT to return the
call to the HANDSET user or the HANDSET user
can press the button or button to return
the call.
4. To transfer the call, the BASE UNIT user must
press the button. the HANDSET user could
stay on the line to join a three-way conversation by
pressing the TALK button. Press the button
again to release the line to the BASE UNIT user.
Transfer Call from BASE UNIT to HANDSET
1. During the conversation through the BASE UNIT in the SPEAKERPHONE mode and
the HANDSET is on the BASE CRADLE, picking up the HANDSET automatically
transfers the call from the BASE UNIT to the HANDSET.
2. If the HANDSET is out of the BASE UNIT charge cradle, press the int/ menu button on
the BASE UNIT. The HANDSET emits a rapid beep sound. If the HANDSET user does
not respond, press the /MENU to return to call.
3. The HANDSET user can press the button to answer. An intercom link between
the BASE UNIT and the HANDSET is established and the call will be put on hold.
4. To transfer the call, the HANDSET user must press the button. the BASE UNIT
user could stay on the line to join a three-way conversation by pressing the button.
If you wish to release the line to the HANDSET user, press the speaker button again.
DEL/INT
SPEAKER
0
DEL/INT
INT
INT
TALK
DEL/INT
TALK
INT
DEL/INT
TALK
SPEAKER
Operation
manual 9742.qxd 1/11/2003 11:25 AM Page 43