User's Manual Part 2

34
4. To end the conversation press the button again.
Intercom Call from BASE UNIT to HANDSET
1. Press the /MENU on the BASE UNIT. The LCD Screen
of the initiating BASE UNIT will display “Select H/S:.”
2. Enter the ID # of the receiving HANDSET by
pressing the TELEPHONE KEYPAD to
buttons (self exclusive).
3. The receiving HANDSET will receive a page tone
and the LCD Screen will display “Base Unit # X,
Paging you.”
4. The receiving HANDSET will connect by pressing
the button. Both LCD Screen will display
“Intercom With:, Base Unit # X.”
5. To end the INTERCOM CALL, press the
/MENU again. The LCD Screen of both HAND-
SET and BASE UNIT will return to Standby mode.
Transfer Call from HANDSET to HANDSET
1. During a call conversation, press the
button. The LCD Screen of the initiating HANDSET
will display “Select H/S:.”
2. Enter the ID # of the receiving HANDSET by
pressing the TELEPHONE KEYPAD to
buttons (self exclusive).
3. The initiating HANDSET will return to STANDBY
mode.
4. The receiving HANDSET will receive a special
alerting tone and the LCD Screen will display
“Transfer call.” If available, the caller’s telephone
number will be displayed on the LCD Screen after the
first ring.
5. The receiving HANDSET will answer the call by
pressing the button.
6. If the receiving HANDSET does not answer the
call within 30 seconds, the initiating HANDSET will
receive a ring back melody.
Initiating HANDSET
Receiving HANDSET
Receiving HANDSET
1 9
INT
DEL/INT
DEL/INT
1
9
TALK
DEL/INT
INT
Multi-HANDSET, Multi-BASE UNIT System Operation
manual 9742.qxd 1/11/2003 11:25 AM Page 42