User's Manual Part 2

33
Multi-HANDSET, Multi-BASE UNIT System
The system supports the registration of 9 HANDSETS into the BASE UNIT. The user at his
option can add another BASE UNIT (B2) and register the same HANDSETS. The HANDSETS
can make an INTERCOM CALL, CALL TRANSFER to one another provided they are linked to
the same BASE UNIT at a time.
Intercom Call from HANDSET to HANDSET
1. With the HANDSET in STANDBY mode, press the
button . The LCD Screen of the initiating
HANDSET will display “Select H/S:.”
2. Enter the ID # of the receiving HANDSET by
pressing the TELEPHONE KEYPAD to
buttons (self exclusive).
3. The receiving HANDSET will receive a page tone
and the LCD Screen will display “Handset # X,
Paging you.”
4. The receiving HANDSET will connect by pressing
the button. Both LCD Screen will display
“Intercom With:, Handset # X.”
5. To end the INTERCOM CALL, press the
again. The LCD Screen of both HANDSET
will return to Standby mode.
Receiving a Call while in Intercom Call
1. When a call arrives, both HANDSET of the already
connected Intercom call will emit two short double
“beep” sound. The Caller ID information, if available,
will display on the LCD Screen after the alert beep.
2. Press the button to terminate the Intercom
call.
3. Press the button to access the call.
Intercom Call from HANDSET to BASE UNIT
1. Press the button and the KEYPAD button on the HANDSET.
2. The BASE UNIT emits a beep sound, simultaneously the IN USE LED indicator will light
up and the BASE UNIT will display INTERCOM.
3. The BASE UNIT user can respond by pressing the /MENU button and start
conversation with the caller from the HANDSET.
1
9
FLASH/EDIT
TALK
DEL/INT
FLASH/EDIT
FLASH/EDIT
Initiating HANDSET
Initiating HANDSET
Receiving HANDSET
Both HANDSET
DEL/INT
0
DEL
Multi-HANDSET, Multi-BASE UNIT System OperatioN
manual 9742.qxd 1/11/2003 11:25 AM Page 41