User's Manual Part 2

32
3. Press the /FLASH button to reset the Message Waiting Indication. “Off” will begin
flashing.
4. Press and hold the /REDIAL button to delete the indication. A long “beep” will
sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
I. Setting the Area Code
1. Press the and hold /MENU button to enter the menu.
2. Press the button to go to the AREA CODE programming option.
3. Press the /FLASH button. The entry will display a flashing prompt at the right side
of the number field.
4. Press the TELEPHONE KEYPAD to buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the /REDIAL button to save
the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
J. Setting the ALARM CLOCK
1. Press the and hold /MENU button to enter the menu.
2. Press the button to go to the ALARM CLOCK programming option.
3. Press the /FLASH button. Set the time by pressing the TELEPHONE KEYPAD
to buttons. Press the button to enter AM, or button to enter PM.
The default ALARM CLOCK setting is “Off.”
4. When the desired setting is displayed, press and hold the /REDIAL button to save
the setting. A long “beep” will sound to confirm the setting has been saved.
5. Press the /MENU button to return to STANDBY mode.
NOTE:
To stop the alarm, press any TELEPHONE KEYPAD button. The ALARM setting is one short
setting and once activated it has to be re-set for the next alarm.
K. Dial Mode
EDIT
SAVE
INT
INT
9
EDIT
1
0
SAVE
INT
INT
EDIT
1
1
2
SAVE
INT
0
0
Caller ID System Operation
manual 9742.qxd 1/11/2003 11:25 AM Page 40