User's Manual Part 2

31
F. Changing the Language
1. Press the and hold /MENU button to enter the menu.
2. Press the button to go to the LANGUAGE programming option.
3. Press the /FLASH button to change the setting. “English” will begin flashing.
4. Press the SCROLL UP or DOWN button to toggle between ENGLISH,
ESPANOL, and FRANCAIS.
5. When the desired setting is displayed, press and hold the /REDIAL button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
G. Changing the User Name
1. Press the and hold /MENU button to enter the menu.
2. Press the button to go to the USER NAME programming option.
3. Press the /FLASH button to change. The entry will display a flashing prompt over
the first character of the present USER NAME.
4. Enter the desired USER NAME using the TELEPHONE KEYPAD ( /ABC to
/WXY) buttons. The USER NAME can contain a maximum of 12 characters. See
page 17 for details.
5. Press and hold the /REDIAL button to save the setting. A long “beep” will sound
to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
NOTE: The USER NAME will be displayed on the BASE UNIT LCD Screen during
STANDBY mode.
H. Deleting Message Waiting Indication
1. Press the and hold /MENU button to enter the menu.
2. Press the button to go to the MESSAGE WAITING programming option.
INT
6
EDIT
SAVE
INT
INT
7
EDIT
2
9
SAVE
INT
INT
8
DEL
Caller ID System Operation
manual 9742.qxd 1/11/2003 11:25 AM Page 39