User's Manual Part 2

Caller ID System Operation
30
6. Press the TELEPHONE KEYPAD button to choose AM or press the button
to choose PM. The month will begin flashing.
7. Press the TELEPHONE KEYPAD to button to enter the month. The date
will begin flashing.
8. Press the TELEPHONE KEYPAD to button to enter the date.
9. When the desired setting is displayed, press and hold the /REDIAL button to save
the setting. A long beep will sound and you are returned to the options menu.
10. Continue with programming or press the /MENU button to return to STANDBY
mode.
D. Adjusting the Contrast
1. Press the and hold /MENU button to enter the menu.
2. Press the button to go to the CONTRAST programming option.
3. Press the /FLASH button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP or DOWN button to toggle from 1 to 8 levels of
contrast.
5. When the desired setting is displayed, press and hold the /REDIAL button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
E. Setting the PBX Number
1. Press the and hold /MENU button to enter the menu.
2. Press the button to go to the PBX NUMBER programming option.
3. Press the /FLASH button to change the setting. “OFF” will begin flashing.
4. Press the SCROLL UP or DOWN button to customize the digit to match your
PBX system. When not connected to a PBX, the phone will only function normally when
set to “OFF.”
5. When the desired setting is displayed, press and hold the /REDIAL button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
1
INT
1
0
2
1
0
SAVE
INT
4
EDIT
SAVE
INT
INT
EDIT
SAVE
INT
5
manual 9742.qxd 1/11/2003 11:25 AM Page 38