User's Manual Part 2

28
Function Settings for BASE UNIT
You can change the setting on the HANDSET in the funtions menu. Access
the functions menu by pressing and holding the /MENU button.
There are 11 settings in the functions menu which can be changed. You can
scroll through the function menu in the listed order by pressing the SCROLL
DOWN button.
Settings can be accessed by pressing the corresponding TELEPHONE
KEYPAD button on the BASE UNIT. To edit a setting, press the /FLASH
button, use the SCROLL UP or DOWN button to toggle between the
setting options, and then press and hold the /REDIAL button to save the
changes Press the /MENU button to exit the functions menu.
INT
EDIT
SAVE
INT
TELEPHONE
KEYPAD
Funtion
Ring Hi/Low/Off: Changes the volume of the ringer on the BASE UNIT or the
ringer OFF.
First Ring On/Off: Turns the first ring of the phone OFF so that it does not ring
until Caller ID information has been displayed. Particularly useful when using the
PREFFERED and BLOCKED call features or the PRIVATE and UNAVAILABLE
ring settings.
Time Set: Changes the time and date.
Contrast: Adjust the brightness of the LCD Screen for optimum viewing.
PBX Number: Insert a “PBX Number” before an outgoing number is dialed.
Select the number (0-9) which is required to access an outside line when using
a switchboard system, and the phone will automatically dial the PBX number and
a pause before any speed dial or Caller ID callback number. Factory setting is
“OFF.”
Language: Changes the language that appears on the LCD Screen. Choose
between English, French, or Spanish.
User Name: Changes the user name (ID) that appears on the LCD Screen
during STANDBY mode.
Message Waiting Delete: Clears current message waiting indication.
Area Code: Adds the local Area Code to numbers that were stored as 7-digits
in the phone book and 10-digit dialing is required in the local calling area.
Alarm Clock: Sets the Alarm clock time.
Dial Mode:
1
2
3
4
5
6
7
8
9
0
*
Caller ID System Operation
manual 9742.qxd 1/11/2003 11:25 AM Page 36