User's Manual Part 2

B. Setting the Ringer Melody

1. Press the /MENU button to enter the menu.

2. Press the button to go to the RINGER MELODY programming option.

3. Press the button to change the setting. “2” will begin flashing.

4. Press the SCROLL UP or DOWN button to select 1 of the 10 RINGER

MELODIES available. A ringer sample will be heard for 2 seconds when toggling from

one RINGER MELODY to another. The preset RINGER MELODY is “2.”

5. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

C. Turning the FIRST RING ON or OFF

1. Press the /MENU button to enter the menu.

2. Press the button to go to the FIRST RING programming option.

3. Press the button to change the setting. “ON” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle between ON or OFF.

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

D. Setting the Time and Date

1. Press the /MENU button to enter the menu.

2. Press the button to go to the TIME set programming option.

3. Press the button to change the setting. The hour will begin flashing.

4. Press the TELEPHONE KEYPAD to button to enter the hour. The minute

will begin flashing.

VOL

FLASH/EDIT

SAVE

Caller ID System Operation

VOL

FLASH/EDIT

SAVE

VOL

FLASH/EDIT

manual 9742.qxd 1/11/2003 11:25 AM Page 31