User's Manual Part 1

11
Placing Calls using the HANDSET
1. Press the button. “Talk” will display and the Call
Timer starts to count.
2. Wait until you hear a dial tone and then dial the
phone number.
3. When you have finished your call, press the but-
ton again or place the HANDSET on the BASE UNIT.
The duration of the call will be displayed on the LCD
Screen for about 3 seconds.
OR
1. Dial the phone number.
2. Press the button. The number displayed will be
dialed.
3. When you have finished with your call, press the
button again or place the HANDSET on the BASE
UNIT. The duration of the call will be displayed on the
LCD Screen for about 3 seconds.
Placing Calls using the BASE UNIT
1. Press the button on the BASE UNIT.
2. Wait until you hear a dial tone and then dial the phone
number.
3. When you have finished your call, press the but-
ton again.
Handset Volume Control
1. During a call conversation, adjust the HANDSET
receiver volume level by pressing the /MENU
button. The LCD Screen will display “volume setting.”
2. The default setting is “Low.” Press the SCROLL
UP or DOWN button, or press the TELE-
PHONE KEYPAD to button to select the
desired setting from Low, Medium, High or Maximum.
Redial Feature using the HANDSET
1. If you get a busy tone, press the button or place
the HANDSET on the BASE UNIT to hang up.
2. Later, press the button again.
3. Listen for a dial tone.
TALK
VOL
1
4
Cordless Telephone Operation
TALK
TALK
TALK
SPEAKER
SPEAKER
TALK
TALK
manual 9742.qxd 1/11/2003 11:25 AM Page 19