User's Manual

Multi-HANDSET, Multi-BASE UNIT System Operation
Multi-HANDSET, Multi-BASE UNIT System
The system supports the registration of 9 HANDSETS to a BASE UNIT. The HANDSETS can
make INTERCOM CALLS and CALL TRANSFERS to one another provided they are using the
same BASE UNIT at that time.
Intercom Call
1. With the HANDSET in STANDBY mode, press the
button. The LCD Screen of the initiating
HANDSET will display “Select H/S:.”
2. Enter the ID # of the receiving HANDSET by
pressing the TELEPHONE KEYPAD to
buttons.
3. The receiving HANDSET will receive a page tone
and the LCD Screen will display “Handset #,
Paging you.”
4. The receiving HANDSET will connect by pressing
the button. Both LCD Screens will display
“Intercom with:, Handset #.”
5. To end the INTERCOM CALL, press the
again. The LCD Screen of both HANDSETS will
return to STANDBY mode.
Receiving a Call while in Intercom Call
1. When an outside call is received, both HANDSETS
involved in the Intercom call will emit two short
double “beep” sounds. The Caller ID information, if
available, will display on the LCD Screens after the
beeps.
2. Press the button to terminate the
Intercom call.
3. Press the button to access the call.
DEL/INT
DEL/INT
Initiating HANDSET
Initiating HANDSET
Receiving HANDSET
Both HANDSET
DEL/INT
1
9
#
0
wxy z
5.8 dss
MENU RE/PA
EDIT
VOL SAVE
F
L
A
S
H
C
H
A
N
DIR/
ESC
2
abc
3
de f
6
mno
5
jkl
4
ghi
7
pqr s
8
tuv
TA L K
D
EL
TALK
9
wxyz
1
28
DEL
5860 man.qxd 11/7/2003 5:48 PM Page 37