User's Manual

Caller ID System Operation

5. Press the TELEPHONE KEYPAD to button to enter the minutes. “AM” or

“PM” will begin flashing.

6. Press the TELEPHONE KEYPAD button to choose “AM” or press the

button to choose “PM”. The month will begin flashing.

7. Press the TELEPHONE KEYPAD to button to enter the month. The date

will begin flashing.

8. Press the TELEPHONE KEYPAD to button to enter the date.

9. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting. A long beep will sound and you are returned to the options menu.

10. Continue with programming or press the /MENU button to return to STANDBY

mode.

E. Adjusting the Contrast

1. Press the /MENU button to enter the menu.

2. Press the button to go to the CONTRAST programming option.

3. Press the /FLASH button to change the setting. “3” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle from level 1 to level 8 of

contrast.

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

F. Setting the PBX Number

1. Press the /MENU button to enter the menu.

2. Press the button to go to the PBX NUMBER programming option.

3. Press the /FLASH button to change the setting. “Off” will begin flashing.

4. Press the SCROLL UP or DOWN button to customize the digit to match your

PBX system. When not connected to a PBX system, the phone PBX NUMBER

programming option must be set to “OFF” for the phone to function correctly.

EDIT

SAVE

EDIT

SAVE

jkl

abc

mno

VOL

5860 man.qxd 11/7/2003 5:48 PM Page 33