User's Manual

9. Slide the HANDSET BATTERY

COMPARTMENT COVER firmly into place in

its closed position.

10. IMPORTANT: Before initial use, charge the

HANDSET for 12 hours.

11. TONE/PULSE Select Switch:

A. If your home is equipped with a tone

dialing system, set the TONE/PULSE

Select Switch to the TONE position.

B. If you have a rotary dialing system, set the

TONE/PULSE Select Switch to the

PULSE position.

C. If you are not sure which system you

have, set the TONE/PULSE Select Switch

to the TONE position. Press the

button on the HANDSET to get a dial

tone, and press any button on the

TELEPHONE KEYPAD except the zero. If

the dial tone continues, it means that you

do not have TONE dialing service. Press

the button on the HANDSET to hang

up. Set the TONE/PULSE Select Switch

to the PULSE mode and then try again.

12. Set the date and time on the HANDSET. (See page 23 for details.)

13. Set the date and time on the BASE UNIT. (See page 30 for details.)

7. Install the HANDSET BATTERY PACK by plugging it into the BATTERY CONNECTOR

inside the BATTERY COMPARTMENT.

8. Place the BATTERY PACK inside the BATTERY COMPARTMENT.

AC ADAPTOR

TELEPHONE LINE CORD

TELEPHONE

JACK

120V WALL

OUTLET

TONE/PULSE

SELECT SWITCH

POWER-IN

CONNECTION JACK

TELEPHONE LINE

CONNECTION

JACK

Getting Started

Getting Start

TALK

5860 man.qxd 11/7/2003 5:48 PM Page 16