User's Manual

Caller ID Sy

5. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

G. Changing the Language

1. Press the /MENU button to enter the menu.

2. Press the button to go to the LANGUAGE programming option.

3. Press the /FLASH button to change the setting. “English” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle between ENGLISH,

ESPANOL, and FRANCAIS.

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

H. Changing the User Name

1. Press the /MENU button to enter the menu.

2. Press the button to go to the USER NAME programming option.

3. Press the /FLASH button to change. The entry will display a flashing prompt over

the the first character of the present USER NAME.

4. Enter the desired USER NAME using the TELEPHONE KEYPAD to

buttons. The USER NAME can contain a maximum of 12 characters. See

page 18 for details.

5. Press and hold the /RE/PA button to save the setting. A long “beep” will sound

to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

NOTE: The USER NAME will be displayed on the HANDSET LCD Screen during

STANDBY mode.

Caller ID System Operation

EDIT

SAVE

tuv

wxyz

pqrs

VOL

5860 man.qxd 11/7/2003 5:48 PM Page 34