User's Manual

Caller ID System Operation

K. Registering the HANDSET(S)

1. Press the /MENU button to enter the menu.

2. Press the button to go to the REGISTER programming option.

3. Press the /FLASH button. The LCD Screen will

prompt “Select base.” The default setting is “Base 1

(B1)”.

4. To confirm, press the /FLASH button again. The

LCD Screen will display “Put down H/S”. Put the

HANDSET on the BASE UNIT charge cradle within

6 seconds. A confirmation “beep” tone will be heard.

5. The BASE UNIT will automatically assign the ID

number of the newly registered HANDSET. The

HANDSET ID # will be displayed on the LCD Screen.

6. To register more HANDSETS, follow steps 1 to 4.

7. Continue with programming or press the /MENU

button to return to STANDBY mode.

NOTE:

To register the HANDSET(S) to another BASE UNIT, select the BASE 2 option by pressing

the SCROLL UP or DOWN button. The second BASE UNIT (B2) must be

connected to a separate telephone line.

L. Setting the ALARM CLOCK

1. Press the /MENU button to enter the menu.

2. Press the /OPTION button to go to the ALARM CLOCK programming option.

3. Press the /FLASH button. Set the time by pressing the TELEPHONE KEYPAD

to buttons. Press the button to enter AM, or button to enter PM.

The default ALARM CLOCK setting is “Off.”

4. When the desired setting is displayed, press and hold the /RE/PA button to save

the setting. A long “beep” will sound to confirm the setting has been saved.

5. Press the /MENU button to return to STANDBY mode.

NOTE:

To stop the alarm, press any TELEPHONE KEYPAD button. The ALARM setting is a one

time setting, therefore the alarm must be re-set before the alarm will sound again.

EDIT

VOL

SAVE

EDIT

VOL

EDIT

VOL

5850 DSS man.qxd 11/18/2003 10:20 AM Page 33