User's Manual

Cordless Telephone Operation

Caller ID Sys

Using the Headset Feature

Your HANDSET, when connected to a headset (not

included), will provide you with hands-free

communication.

Pull out the HEADSET JACK COVER, then insert the

small plug on the end of the headset into the HEADSET

JACK to the left side of the HANDSET. Follow the

procedures discussed in “Receiving Calls” and “Placing

Calls” to receive and place a call.

NOTE:

When you plug the headset plug into the HEADSET

JACK it automatically mutes the MICROPHONE and

SPEAKER of the HANDSET. Unplug the headset to

return the HANDSET to normal use.

Headsets are available at most retail outlets that sell

telephone equipment. The HEADSET JACK is

compatible with 2.5 mm headset plugs only.

MICROPHONE

HEADSET

SPEAKER

HEADSET JACK

COVER

HEADSET PLUG (2.5mm)

IMPORTANT

In order to utilize the Caller ID feature, you

must subscribe to Caller ID service from

your local telephone company.

Extension In Use Indicator

This telephone can detect when a HANDSET is already

in use. The LCD Screen of all of the HANDSETS

currently linked to the same BASE UNIT will display

“Ext in-use.” This means you will have to wait until the

line is free to make a call.

5850 DSS man.qxd 11/18/2003 10:20 AM Page 18