User's Manual

Caller ID System Operation

3. Press the /FLASH button to change the setting. “Off” will begin flashing.

4. Press the SCROLL UP or DOWN button.

PBX MODE OFF - Set for direct line access. The preset mode is Off.

PBX MODE ON - When connected to a switchboard system.

5. Press the /Save button to save the setting. A double “beep” will sound to confirm

the setting has been saved.

H. Changing the Pause Time

1. Press and hold the /Mute button to enter the menu.

2. Press the button to go to the PAUSE TIME programming option.

3. Press the /FLASH button to change the setting. “4” will begin flashing.

4. Press the SCROLL UP or DOWN button to select the desired time delay.

5. Press the /Save button to save the setting. A double “beep” will sound to confirm

the setting has been saved.

6. Continue with programming or press the /Mute button to return to STANDBY

mode.

I. Deleting Message Waiting

1. Press and hold the /Mute button to enter the menu.

2. Press the button to go to the MESSAGE WAITING programming option.

3. Press the /FLASH button to reset the Message Waiting Indication. “dElEtE” will

begin flashing.

4. Press the /Save button to delete the indication. A double “beep” will sound to

confirm the setting has been saved.

6. Continue with programming or press the /Mute button to return to STANDBY

mode.

tuv

wxyz

Edit

Dir

manual 5815 analog.qxd 3/16/2004 2:40 PM Page 31