User's Manual

Cordless Telephone Operation
10
Placing Calls
1. Press the button. “TALK” will display and the Call
Timer starts to count.
2. Wait until you hear a dial tone and then dial the phone
number.
3. When you have finished your call, press the
button again or place the HANDSET on the BASE
UNIT.
Redial Feature
1. If you get a busy tone, press the button or place
the HANDSET on the BASE UNIT to hang up.
2. Later, press the button again.
3. Listen for a dial tone.
4. Press the /Del button. This will automatically
redial the last telephone number you called.
5. When you have finished with your call, either press the
button again or place the HANDSET on the
BASE UNIT.
Or
1. Press the /Del button.
2. Press the button. The number displayed will be
automatically redial.
3. When you finished with your call, pres the button
again or place the HANDSET on the BASE UNIT.
HANDSET Ringer Volume
1. Adjust the HANDSET ringer volume using the Ringer
switch on the right side of the HANDSET.
2. Select between Hi, Low, Off Ringer.
S
a
v
e
/
P
a
u
s
e
D
e
l
C
h
a
n
1, 3
Talk
Talk
Talk
Talk
Talk
Redial
NOTE: If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds to
warn you that the background noise level is too high for proper communication
between the HANDSET and the BASE UNIT. When you hear this sound, you should
move closer to the BASE UNIT to reduce the noise level. Otherwise, the call will
automatically cut off.
S
a
v
e
/
P
a
u
s
e
D
e
l
C
h
a
n
1, 2, 5
4
Talk
Talk
Redial
manual 5815 analog.qxd 3/16/2004 2:40 PM Page 17