User's Manual

Caller ID System Operation

I. Deleting Message Waiting Indication

1. Press the button to enter the menu.

2. Press the button to go to the MESSAGE WAITING programming option.

3. Press the button to reset the Message Waiting Indication. “OFF” will begin

flashing.

4. Press and hold the button to delete the indication. A long “beep” will

sound to confirm the setting has been saved.

5. Continue with programming or press the button to return to STANDBY

mode.

J. Setting the Area Code

1. Press the button to enter the menu.

2. Press the button to go to the AREA CODE programming option.

3. Press the button. The entry will display a flashing prompt at the left side of

the number field.

4. Press the TELEPHONE KEYPAD to buttons to enter the three digit area

code for your phone number.

5. When the desired setting is displayed, press and hold the button to save

the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the button to return to STANDBY

mode.

NOTE: To use the call back function, press the button and then select the 10-DIGIT

DIALING mode. Press the button and the unit will automatically dial the

stored 7-digit number plus the area code. The LCD Screen will only display the last

7-DIGITS for all 10-DIGIT INCOMING CALLS that matched the AREA CODE

setting.

EDIT/FLASH

TALK

VOL/MENU

SAVE/RE/PA

Option

Oper

WXYZ

Oper

SAVE/RE/PA

manual BE - 24DC ITS.qxd 8/25/2003 10:02 AM Page 31