User's Manual

Caller ID S

B. Setting the Ring Melody

1. Press the button to enter the menu.

2. Press the button to go to the RING MELODY programming option.

3. Press the button to change the setting. “2” will begin flashing.

4. Press the SCROLL UP or DOWN button to select 1 of the 10 RING MELODIES

available. A ringer sample will be heard for 2 seconds when toggling from one RING

MELODY to another. The preset RING MELODY is “2.”

5. When the desired setting is displayed, press and hold the button to save

the setting.

6. Continue with programming or press the button to return to STANDBY

mode.

C. Turning the FIRST RING ON or OFF

1. Press the button to enter the menu.

2. Press the button to go to the FIRST RING programming option.

3. Press the button to change the setting. “ON” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle between ON or OFF.

5. When the desired setting is displayed, press and hold the button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the button to return to STANDBY

mode.

D. Setting the Time and Date

1. Press the button to enter the menu.

2. Press the button to go to the TIME SET programming option.

3. Press the button to change the setting. The hour will begin flashing.

4. Press the TELEPHONE KEYPAD to button to enter the hour. The minute

will begin flashing.

EDIT/FLASH

VOL/MENU

SAVE/RE/PA

ABC

Oper

DEF

GHI

Caller ID System Operation

manual BE - 24DC ITS.qxd 8/25/2003 10:02 AM Page 28