User's Manual

Cordless Telephone Operation

Using the Headset Feature

Your HANDSET, when connected to a headset (not included), will provide you with hands-free

communication.

Pull out the HEADSET JACK COVER, then insert the small plug on the end of the headset into

the HEADSET JACK to the left side of the HANDSET. Follow the procedures discussed in

“Receiving Calls” and “Placing Calls” to receive and place a call.

NOTE: When you plug the headset plug into the HEADSET JACK it automatically mutes the

MICROPHONE and SPEAKER of the HANDSET. Unplug the headset to return the

HANDSET to normal use.

Headsets are available at most retail outlets that sell telephone equipment. The HEADSET

JACK is compatible with 2.5 mm headset plugs only.

MICROPHONE

HEADSET

SPEAKER

HEADSET JACK

HEADSET PLUG (2.5mm)

Extension In Use Indicator

This telephone can detect when a HANDSET is already

in use. The LCD Screen of all of the HANDSETS

currently linked to the same BASE UNIT will display

“Ext in-use.” This means you will have to wait until the

line is free to make a call.

manual BE - 24DC ITS.qxd 8/25/2003 10:01 AM Page 17