User's Manual

Cordless
8
Desk Mounting
For normal position, as shown in Figure 1, place
the BASE UNIT on any desired but suitable
location.
NORMAL POSITION (MOUNTING BRACKET not
required):
Wall Mounting the Unit
1. Connect the short telephone line cord to the Telephone Line Connection Jack on the back
of the Base Unit.
2. Insert the free end of the short line cord through the hole of the mounting bracket.
3. Insert the hooks of the mounting bracket into the matching slots on the back of the uni.
Press the two locks located on the side of the mounting bracket unitl the locking hooks snap
into the inner slots of the Base Unit.
4. Press the middle locking hooks of the mounting bracket while pushing the back of the
mounting bracket until it snaps to lock.
5. Plug the free end of the short line cord into the modular wall jack.
6. Align the upper keyhole on the mounting bracket with the upper stud of the wall plate, so
that the opening end of the mounting bracket matches the lower stud, pull the mounting
bracket down unitl it is securely seated.
page
charg
In use
Power
2.4 GHz
Cordless
FLASH
RE/PA
MENU
VOL
SAVE
INT
DELETE
EDIT
1
2
3
ABC
DE F
5
6
JKL
MNO
4
GHI
8
9
TUV
WXYZ
7
PQRS
0
#
*
Tone
Ope r
D
I
R
/
E
S
C
T
A
L
K
New call
MSG waiting
2.4 GHz
Cordle ss
Desk Mounting
manual BE - 24DC ITS.qxd 8/25/2003 10:01 AM Page 14