User's Manual

Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless
telephone. For more detailed descriptions of the operations and features of this telephone, refer
to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is any visible
damage, do not attempt to operate this equipment. Return it to the place of purchase.
2. Check to be sure you have all items that come with this cordless telephone system. You
should have a HANDSET, BASE UNIT, CHARGER, AC ADAPTOR, TELEPHONE LINE
CORD, SHORT TELEPHONE LINE CORD, BELT CLIP, BATTERY PACK, and Owner’s
Manual.
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION
JACK at the back of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE:
9V DC, 300mA for the BASE UNIT.
9V DC, 150mA for the CHARGER UNIT.
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the
other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT.
(If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE
JACK ADAPTOR. This adaptor is available at the same place you purchased your
telephone.)
6. We recommend not placing this unit next to appliances. Doing so may cause interference.
5
The extra handset package comes with the
following items: HANDSET, CHARGER,
CHARGER AC ADAPTOR, BATTERY PACK,
and BELT CLIP.
HANDSET
BELT CLIP
TELEPHONE LINE CORD
AC ADAPTOR
SHORT TELEPHONE
LINE CORD
BASE UNIT
BATTERY PACK
page
chg
in use
2.4 GHz
Cordless
CHARGER
HANDSET
AC ADAPTOR
BATTERY
PACK
BELT
CLIP
manual BE - 24DC ITS.qxd 8/25/2003 10:01 AM Page 11