User Manual

ManualsBrandsLionda Technology ManualsElectronicsFRS/GMRS

CALL

BATTERY INSTALLATION

Getting Started Getting Started

Getting Started

Operation

11 1212

WARNING

DO NOT CHARGE THIS UNIT USING AN AC/DC ADAPTER WITH REGULAR

The GMRS/FRS has a built in POWER SAVER feature for maximum battery

life. But when the GMRS/FRS is not being used, conserve battery power by

pressing the POWER button to OFF. Remove the batteries if the unit will

not be used for a long period of time.

4. Reinstall the BATTERY COMPARTMENT COVER and return the BELT

2. Remove the BATTERY COMPARTMENT COVER from the BATTERY

COMPARTMENT. See Figure 3.

Figure 3 Figure 4

(batteries not included) following the polarities as shown in Figure 4.

LCD Screen

G. -

- CHANNEL NUMBER. Changes from 1 to 22 as selected

by the user.

- CTCSS code. Changes from 1 tp 38 as selected by the

user.

icon. Displayed when transmitting a signal.

icon. Displayed when receiving a signal.

- Displayed during the CHANNEL SCAN mode.

Press and hold the button for 5 seconds until

BUTTON LOCK symbol is displayed.

H. - Displays the current BATTERY LEVEL charge.

Displays the current VOLUME LEVEL.

- Displays during the VOX mode.

Turning the Unit ON

Turning the Unit OFF

Receiving a Signal

LCD Screen will display then the current channel.

Transmitting a Signal

from the mouth.

Check the channel activity by pressing and holding the button.

someone is talking on the current channel. Press and hold the

While holding the button, speak into the unit using a normal tone

of voice.

Release the button when you have finished transmitting.

NOTE: In order for other people to receive your transmission, they must also be

on the same channel and CTCSS sub-channel you are currently using. Refer to the

LCD Screen will turn blank.

Adjusting Speaker Volume

Press the DOWN button to decrease the .Speaker Volume

Press the UP button to increase the Speaker Volume.

The level is indicated by the number of bars

displayed in the upper right corner of the LCD Screen.

Speaker Volume

Changing CHANNELS

1. Press and release the button until the current channel

number flashes on the LCD Screen.

2. While the channel number is flashing:

Press the UP button to move to a higher channel.

Press the DOWN button to move to a lower channel.

The channel changes from 1 to 22, or from 22 to 1.

The GMRS/FRS has 22 available channels. To change channels:

button to confirm the channel and TRANSMIT.

3. Press the button to confirm the channel selection and shift to

CTCSS SUB-CHANNEL SELECTION mode, or press the button to

select the desired channel and return to NORMAL mode, or press the

MONITOR

Press the button for normal monitoring.

Press and hold the button until it "beeps" for continuous monitoring.

You can use the MONITOR feature to check for weaker signals in the current

channel.

MENU/LOCK Button (FUNCTION EDITING)

Press and hold the button for 5 seconds to activate or deactivate the

BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.

Depress the button momentarily;

Press the button briefly to enter into the FUNCTION EDIT modes in due

order: MAIN CHANNEL / CTCSS & VOX mode .

NOTE: In the current FUNCTION EDIT mode, press the button to return

to the NORMAL mode after making your selection. In the FUNCTION EDIT mode,

press the button again to shift from the current option in each submenu

PTT

to the next option.

NOTE: Channel Change Operations are disabled during BUTTON LOCK

mode. Press and hold the button again to deactivate BUTTON LOCK

mode.