User Guide

If you need help or have any questions, contact us at 1-877-732-4980 or [e-mail]
Device Installation
Install Your Device
Turn on the ignition, and verify green and orange lights on the device.
Power on the tablet. The app will automatically start. The tablet will then recognize all devices within range.
The device at the top of the list will be the one closest to you. Double check by matching the serial number,
then choose the device.
OBD devices only — A pop-up window will prompt you to input the current odometer reading of the
vehicle.
You will need your device, the cord, and the tablet. If you have ordered more than one tablet, you may
choose any tablet that you have received, as these have not been paired yet. Begin with the ignition and
the tablet powered o.
1
3
4
5
J-BUS Devices: Connect the cord to the device, then plug the device into the J-Bus port.
OBD Devices: Connect the OBD extension cord to the device, then plug the device into the OBDII port.
2