User's Manual

ManualsBrandsLinx Technologies ManualsElectronicsCompact Handheld Transmitter

DESCRIPTION

The Linx OTX-***-HH-CP8-HS Compact

Handheld Transmitter is ideal for general-

purpose remote control and command

applications which require high security. This

unit has been pre-certified for FCC Part 15,

Industry Canada, and European CE (433MHz

only) compliance, reducing costs and time to

market. Available in 315, 418 (standard), or

433.92MHz, this small remote has a

transmission range of up to 750 feet when

combined with an LR Series receiver. The

transmitter unit can be configured with 1 to 8

buttons and the keypad and labeling can be

modified to meet specific OEM customer

requirements. Security is dramatically

enhanced by the on-board HS Series encoder,

which uses Cipherlinx™ technology, a high-

security encryption algorithm and wireless

protocol. When paired with an HS Series

decoder, transmitter identity can be determined

and button permissions established. The unit

uses a single 3V CR2032 lithium button cell.

FEATURES

 FCC, Canada, and CE pre-certified

 Highly secure, encrypted transmission

 1 to 8 buttons

 Customizable keypad

APPLICATIONS INCLUDE

 Secure Remote Control

 Keyless Entry

 Garage / Gate Openers

 Lighting Control

 Call Systems

 Home / Industrial Automation

 Wire Elimination

OEM Configurations

With a one-time NRE and

minimum order, Linx can configure

the keypad and label areas to

meet your specific requirements.

Contact Linx for details.

HS COMPACT HANDHELD TRANSMITTER DATA GUIDE

2.00"

1.35"

R 0.2"

2.81

1.62"

0.60"0.20"

Revised 4/5/07

Figure 1: Package Dimensions

WIRELESS MADE SIMPLE

F ASCO

Lights

Spa

Pool

PART # DESCRIPTION

OTX-***-HH-CP8-HS-xxx HS Compact Handheld Transmitter

MDEV-***-HH-CP8-HS HH-CP8 Master Development System

*** = 315, 418 (Standard), 433.92MHz

xxx = Reserved for custom colors. Leave blank for standard black

ORDERING INFORMATION

CipherLinx

T echnology

Summary of content (7 pages)

PAGE 1
WIRELESS MADE SIMPLE ® HS COMPACT HANDHELD TRANSMITTER DATA GUIDE DESCRIPTION TM The Linx OTX-***-HH-CP8-HS Compact Handheld Transmitter is ideal for generalpurpose remote control and command applications which require high security. This unit has been pre-certified for FCC Part 15, Industry Canada, and European CE (433MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.
PAGE 2
ELECTRICAL SPECIFICATIONS Parameter Designation Min. POWER SUPPLY Operating Voltage VCC Supply Current ICC Power-Down Current TRANSMITTER SECTION Transmit Frequency Range: IPDN SECURITY OVERVIEW Typical Max. Units Notes 2.1 3.0 3.6 VDC – – 3.4 – mA – – 5.0 – nA 1 OTX-315-HH-CP8-HS – 315 – MHz – OTX-418-HH-CP8-HS – 418 – MHz – OTX-433-HH-CP8-HS – 433.
PAGE 3
TYPICAL SYSTEM SETUP USING THE OPTIONAL KEYPAD PIN The HS Series Compact Handheld Transmitter is intended to make user setup straightforward while ensuring the highest possible security. This inherent ease of use can be illustrated by a typical user setup. The Typical Applications section of the HS Series Decoder Data Guide shows the circuit schematics on which the receiver examples are based. 1.
PAGE 4
OTX-***-HH-CP8-HS BUTTON ASSIGNMENTS This diagram illustrates the relationship between the button locations and encoder data lines. D6 D7 D4 D5 D2 D3 D0 D1 COMPLIANCE REQUIREMENTS The OTX-***-HH-CP8-HS has been pre-certified by Linx Technologies for FCC Part 15 and Industry Canada RSP-100 compliance. The 433.92MHz version has also been tested for CE compliance for use in the European Union. The 315MHz and 418MHz versions are not legal for use in Europe.
PAGE 5
TYPICAL APPLICATIONS 100k 100k R10 R9 100k 100k R8 100k 100k R6 R5 R4 100k 3 2 R2 4 1 3 GND DPAK-X2 U5 DPAK-X2 2 U4 GND 8 7 6 5 R16 9.1M GND C4 4.7uF GND S2 R14 5.1M GND GND GND VCC C1 4.7uF TLV2302 VCC VCC COUT CINCIN+ AOUT AINAIN+ GND U6 1 2 3 4 9.1M VCC R17 R15 9.1M GND B1 BAT-LINX2032 GND GND The TX_ID line will output a Figure 6: LR Receiver and HS Decoder Schematic number associated with the handheld transmitter from which the signal originated.
PAGE 6
MASTER DEVELOPMENT SYSTEM The Master Development System is intended to give a designer all the tools necessary to incorporate the HS Compact Handheld transmitter, LR Series receiver, and HS Series decoder into a product. The Master Development System serves several important functions. It allows the performance and features of the transmitter, LR Series, and HS Series to be quickly evaluated. It shows how to design with the receiver and decoder and how to interface with other components.
PAGE 7
WIRELESS MADE SIMPLE ® U.S. CORPORATE HEADQUARTERS LINX TECHNOLOGIES, INC. 159 ORT LANE MERLIN, OR 97532 PHONE: (541) 471-6256 FAX: (541) 471-6251 www.linxtechnologies.com Disclaimer Linx Technologies is continually striving to improve the quality and function of its products. For this reason, we reserve the right to make changes without notice. The information contained in this Data Guide is believed to be accurate as of the time of publication. Specifications are based on representative lot samples.