Manualshelf

Reference Guide

ManualsBrandsLinx Technologies ManualsElectronicsHumPRO-A Series High Power Data Transceiver
123456789
HUM-A-900-PRO Trace Layout Guide
7 of 9
Note: The vertical SMA connector is a through-hole mount component. The connector must be
installed on the bottom of the PCB. Figure 3 shows the top side of the PCB were the HUM-A-900-
PRO-CAS module is mounted and the solder side of the RP-SMA connector is visible.
Figure 3 - Trace Dimensions and RF Matching Component Placement for Vertical Mount RP-SMA
Connection