Reference Guide
HUM-A-900-PRO Trace Layout Guide
1 of 9
RG-110
HUM-A-900-PRO PCB Trace Layout
Reference Guide
3/29/17
For proper integration of the HUM-A-900-PRO module in end products the following requirements must
be met. A host product incorporating the HUM-A-900-PRO module cannot take advantage of the pre-
existing certification of the component transmitter without conformity to the specific requirements in
these instructions.
Contents
1. Approved RF Connections for HUM-A-900-PRO-UFL ............................................................................ 2
2. Approved RF Connections for HUM-A-900-PRO-CAS ............................................................................ 2
2.1. Edge Mount RP-SMA Connection ................................................................................................. 2
2.2. MicroSplatch Antenna Connection ............................................................................................... 4
2.3. Vertical Mount RP-SMA connection ............................................................................................. 6
3. Approved Antennas ............................................................................................................................... 8
4. Design Verification Test Procedures ...................................................................................................... 9
5. Production Test Procedures for Ensuring Compliance .......................................................................... 9