User Guide

– –
– –
74 75
LASTNETAD - Last Network Address Assigned
Non-Volatile Address = 0x8C-0x8F
These bytes contain the last address assigned using the Join Process.
When a new unit joins the network, it is assigned the next address
and this value is incremented in the administrator. It is initially set to the
administrator address when a network key is generated.
EEXMASK - Extended Exception Mask
Volatile Address = 0xD0-0xD2; Non-Volatile Address = 0x80-0x82
These registers contain a mask for the events in EEXFLAG, using the same
offset and bit number.
To use this value, register EXMASK must be zero. If EXMASK is non-zero,
this register has no effect on the EX line.
When an exception bit is set in EEXFLAG, the corresponding EEXMASK
bit is set, and EXMASK is zero, the EX status line is set, otherwise the
EX line is reset. Mask bits for unassigned flags should be zero for future
compatibility.
PKTOPT - Packet Options
Volatile Address = 0xD3; Non-Volatile Address = 0x83
This register selects options for transferring packet data in the HumPRO
TM
Series. These options are controlled automatically by the HumPRC
TM
application and do not have any effect on its operation.
Figure 82: HumPRC
TM
Series Transceiver Extended Exception Mask Registers
HumPRC
TM
Series Extended Exception Mask Registers
Name
Volatile
Address
Non-Volatile
Address
Description
EEXMASK2 0xD0 0x80 Byte 2 of the extended exception mask
EEXMASK1 0xD1 0x81 Byte 1 of the extended exception mask
EEXMASK0 0xD2 0x82 Byte 0 of the extended exception mask
Figure 83: HumPRC
TM
Series Transceiver Extended Exception Mask Registers
HumPRC
TM
Series Extended Exception Mask Registers
Name
Non-Volatile
Address
Description
LASTNETAD3 0x8C MSB of the last network address assigned
LASTNETAD2 0x8D Byte 2 of the last network address assigned
LASTNETAD1 0x8E Byte 1 of the last network address assigned
LASTNETAD0 0x8F LSB of the last network address assigned