User Guide

– –
– –
54 55
USRCID - User Source Address
Volatile Address = 0x5E-0x61; Non-Volatile Address = 0x13-0x16
These registers contain the address of the module when User Addressing
mode or Extended User Addressing mode are enabled. User Addressing
mode uses bytes 0 and 1 to determine the source address for both
transmitted messages and matching received messages. Extended User
Addressing mode uses all four bytes. When the COMPAT register is 0x02 in
User Address mode, bytes 3 and 2 must be 0. Please see the Addressing
Modes section for more details. Each register byte is read and written
separately. Figure 52 shows the User Source ID registers.
HumPRC
TM
Series User Source Address Registers
Name
Volatile
Address
Non-Volatile
Address
Description
USRCID3 0x5E 0x13 MSB of the extended source address
USRCID2 0x5F 0x14 Byte 2 of the extended source address
USRCID1 0x60 0x15
Byte 1 of the extended source address
MSB of the short source address
USRCID0 0x61 0x16
LSB of the extended source address and short
source address
Figure 52: HumPRC
TM
Series User Source Address Registers
UMASK - User ID Mask
Volatile Address = 0x62-0x65; Non-Volatile Address = 0x17-0x1A
These registers contain the user ID mask when User Addressing mode or
Extended User Addressing mode are enabled. Please see the Addressing
Modes section for more details. Each register byte is read and written
separately.
Figure 53 shows the User ID Mask registers.
Figure 53: HumPRC
TM
Series User ID Mask Registers
HumPRC
TM
Series User ID Mask Registers
Name
Volatile
Address
Non-Volatile
Address
Description
UMASK3 0x62 0x17 MSB of the extended mask
UMASK2 0x63 0x18 Byte 2 of the extended mask
UMASK1 0x64 0x19
Byte 1 of the extended mask
MSB of the short mask
UMASK0 0x65 0x1A LSB of the extended mask and short mask