User's Manual

RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual

1 Description

The Wi.USB-DTS™ is a self-powered, standalone desktop transceiver based on the Radiotronix

Wi.232DTS module. The unit draws its power from the USB port.

2 Wi.USB Setup

• Install the USB driver in Windows. Do not connect the Wi.USB-DTS™ to your PC without first

installing the driver. To install the driver, run the Silicon Laboratories CP210x UART to USB

Bridge Driver as illustrated below.

When the driver installation is complete, you may connect the Wi.USB-DTS™ unit to your PC. Windows

will recognize the hardware and automatically install the driver for it.

If Windows cannot find the driver for the CP210x device, you may have to locate it manually. The driver is

unpacked to the subdirectory “\SiLabs\MCU\CP210x” in the root of your default drive when you first run

the installation.

• Using a USB cable, connect the Wi.USB-DTS™ to the PC.

• IMPORTANT NOTE FOR HYPERTERMINAL USERS: See section 4.1