RK-Wi.232DTS-FCC and FCC-Wi.232DTS User’s Manual Rev 1.0.5 905 Messenger Ln.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual Document Control Created By Engineering Review Marketing Review Approved – Engineering Approved – Marketing Tom Marks 8/9/2005 Revision History Revision 1.0.0 1.0.1 1.0.2 1.0.3 1.0.4 1.0.5 Author TRM TRM TRM CSR / TRM TRM TRM Date 8/9/05 8/15/05 8/29/05 10/7/05 Description Document Created from RK/DTS 1.0.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual Table of Contents 1 Description ...............................................................................................................................3 2 RApid Development Kit Setup .................................................................................................3 3 Using the RK-Wi.232DTS-FCC Evaluation Software ..............................................................4 3.1 COM Port Setup and Selection. ...............
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 1 Description The RK-Wi.232DTS-FCC-FCC is a rapid-development/evaluation kit FCC pre-certified module, the FCCWi232DTS. When used within the guidelines presented in this document, no FCC part 15 testing/certification of the FCC-Wi232DTS is necessary in the end product. Included in the kit is: • 1-Rapid Development Case. • 1-Rapid Development Utility and Documentation CD. • 2-Wi.232DTS Rapid Development Boards. • 2-FCC-Wi.232DTS pinned modules.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 3 Using the RK-Wi.232DTS-FCC Evaluation Software The software supplied with the RK-Wi.232DTS-FCC RadKit is used to read and set the volatile and nonvolatile registers with the Wi.232DTS module. Refer to the Wi.232DTS Users Manual for more information on the register settings. 3.1 COM Port Setup and Selection. Upon starting the RK-Wi.232DTS-FCC evaluation software, you will be presented with a COM port selection dialog box.
RK-Wi.232DTS-FCC Rapid Development Kit 3.3 User’s Manual Non-Volatile Register Page. The Non-Volatile Register page in the evaluation software allows you to change the default settings which will be loaded when the module is powered on. It is important to note that data rates in excess of 19.2kbps cannot be achieved in LP mode due to bandwidth limitations. Tip: If you change the Non-Volatile Data Rate setting, you will have to select the baud rate you set this register to when you start the RKWi.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 4 Using the Evaluation Software 4.1 Setting Register Values. On both the Volatile and Non-Volatile pages, the registers are labeled by function. To set a register value, select the value from the options available for that register and click the “Write” button. To perform a read of that register, simply click the “Read” button. Descriptions of the register functions can be found in the Wi.232DTS Users Manual. 4.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 5 Notes 5.1 Microsoft Windows / Hilgraeve HyperTerminal The RK-Wi.232DTS-FCC Evaluation Kit can be used with HyperTerminal to receive and transmit RS-232 data and send files using file transfer protocols such as ZMODEM. HyperTerminal and many other terminal programs assert RTS by default. On the evaluation board, the RTS line is tied to the CMD pin on the module.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 6 PCB Layout Diagrams 6.1 RK-Wi.
RK-Wi.232DTS-FCC Rapid Development Kit 6.2 User’s Manual FCC-Wi.232DTS (EValuation Module) Layout JP1 Pin 1 JP2 Pin 1 NOTE: Pin 1 of the FCC-Wi.232DTS module’s JP2 aligns with Pin 1 of JP6 on the evaluation board.
RK-Wi.232DTS-FCC Rapid Development Kit Pin Name JP2 Pin 1 JP2 Pin 2 JP2 Pin 3 JP2 Pin 4 JP2 Pin 5 JP2 Pin 6 JP2 Pin 7 JP2 Pin 8 JP2 Pin 9 JP2 Pin 10 JP2 Pin 11 JP2 Pin 12 JP1 Pin 1 JP1 Pin 2 JP1 Pin 3 JP1 Pin 4 JP1 Pin 5 JP1 Pin 6 JP1 Pin 7 JP1 Pin 8 JP1 Pin 9 JP1 Pin 10 JP1 Pin 11 JP1 Pin 12 User’s Manual Pin Description 4V to 12V Vdd RxD0, Wi.232DTS RxD pin TxD0, Wi.232DTS TxD pin CTS0, Wi.232DTS CTS pin CMD (Active Low), Wi.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 7 Schematic Diagrams 7.
RK-Wi.232DTS-FCC Rapid Development Kit 7.2 User’s Manual RK-Wi.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 8 Usage Guidelines for FCC Compliance The FCC-Wi232DTS modules included in this rapid development kit have been awarded a FCC modular approval. That means that this module, when integrated into your end product, requires no FCC part 15 testing as long as the following guidelines are met. Failure to meet any of the following guidelines will prevent the inheritance of the FCC modular certification. 8.
RK-Wi.232DTS-FCC Rapid Development Kit User’s Manual 9 FCC Statements of Compliance 9.1 Statement and Conditions of Modular Compliance FCC NOTICE (FCC ID: Q7V-3F090003X) This device complies with the rules set forth in Part 15 by the Federal Communications Commission. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, including interference that may cause undesired operation.
RK-Wi.232DTS-FCC Rapid Development Kit 9.2 User’s Manual Customer FCC Warning Requirements The end-product user’s manual must contain the following or equivalent verbiage. FCC NOTICE (Containing FCC ID: Q7V-3F090003X) The RF module (FCC ID: Q7V-3F090003X) contained within this device complies with the rules set forth in Part 15 by the Federal Communications Commission. Operation is subject to the following conditions: 1. This device may not cause harmful interference 2.
