User Manual

2
Suretalk Users Guide
CHARGING ONLY [no RF communications]:
• Power up either the Charger Base or the
RF Charger BaseStation.
• Insert RF Microphone fully.
• Charger Base/RF Charger BaseStation
LED changes from red (charge done) to
yellow (charging).
• Charging cycle is complete when red
(charge done) LED is lit.
NORMAL OPERATION:
Cradle Sync
• Power up RF Charger BaseStation.
• SYNC LED on RF Charger BaseStation
flashes slowly.
• Insert RF Microphone fully.
• SYNC LED will flash rapidly then remain lit –
this is known as a successful “Cradle Sync”.
• The system is now ready to establish an RF
link when separated.