User Guide
Table Of Contents
- Copyright © Personal Hobby
- Article Notes
- Legal notice
- The various types of software mentioned in the text are not developed by the author and come from the open source hardware community.
- The author only describes in this article the wired router, wireless router and wireless bridge setup tutorials that comply with national network security, and the Rexchip chip burn-in method.
- The author strongly advocates the maintenance of national cyber security and national information security.
- Bleeping
- 1 Hinlink-H68K Routing Basics
- 2 Hinlink-H68K router out of the box
- 3 Firmware upgrades
- The firmware is from a third party open source community and is not related to the author, this section is only intended as a burn-in tutorial for the RK Rexchip.
- 3.1 Tool preparation for card brushing
- 3.2 TF card swipe operation procedure
- 3.3 Tool preparation for eMMC wire brush
- 3.4 eMMC wire brush operation procedure
- 3.5 Android/Ubuntu Firmware Upgrade
- 4 About power supply and cooling
- 4.1 DC12V adapter option
- 4.2 USB adapter options
- 1 When your device is powered by TYPC and there is instability such as power loss and reboot, please use the DC12V adapter.
- 2 When using a fast charger adapter, a non-standard adapter may output 9 V. The white power light on the H68K will flash and the unit will not power up properly. The H68K will be burned out if you disconnect it as soon as possible and use a standard a...
- 3 H68K Deploy away from heat sources, sources of electromagnetic interference and radiation, and electromagnetic radiation sensitive equipment.
- 4 The TYPC-C wire should be as short and thick as possible to reduce the voltage drop across the 5V voltage, which can lead to unstable operation.
LinkStar-H68K-C D F Model Routing
Quick Start Guide
Prefa
ce
Document version
20220901
2
Symbolic Conventions
Revision
of
records
The following symbols may appear in this document and what they represent
is given below.
Symbols
Versions
Used to warn of an urgent and dangerous situation which,
if not avoided, would result in death or serious personal
injury.
Used to warn of potentially dangerous situations which,
if not avoided, could result in death or serious personal
injury.
Used to warn of potentially dangerous situations which,
if not avoided, could result in moderate or minor
personal injury.
Used to communicate equipment or environmental safety
warnings which, if not avoided, could lead to equipment
damage, data loss, reduced equipment performance or other
unpredictable results.
Caution" without a safety warning symbol does not cover
personal injury.
Used to highlight important/key messages, best practices, tips,
etc.
"Instructions" is not a safety warning message and does not
relate to information on injury to persons, equipment or the
environment.
The revision log accumulates notes for each document update. The latest
version of the documentation contains updates from all previous versions of
the documentation.
Date of
revision
Version
s
Revision notes
2022-0901
01
Official release
Translator: GitHub@IcingTomato