Safety Information

Page 54 of 57 Report No.: LCS210301193AS
Attachment No. 1
TRF No. IEC62368_1D
Shenzhen LCS Compliance Testing Laboratory Ltd.
Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District,
Shenzhen, Guangdong, China
Tel: +(86) 0755-8259 1330 | Fax：+(86) 0755-8259 1332 | E-mail：[e-mail] | http:// www.lcs-cert.com
IEC62368_1D ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
connectors (used for current interruption of non-
LPS circuits), power supply cords, direct plug-in
equipment, electrochemical capacitor modules
(energy storage modules with ultra-capacitors),
enclosures (outdoor), flexible cords and cables,
fuses (branch circuit), ground-fault current
interrupters, interconnecting cables, data
storage equipment, printed wiring, protectors for
communications circuits, receptacles, surge
protective devices, vehicle battery adapters,
wire connectors, and wire and cables.
Annex DVH
Equipment for permanent connection to the
mains supply is subjected to additional
requirements.
N/A
Annex DVH
(DVH.1)
Wiring methods (terminals, leads, etc.) used for
the connection of the equipment to the mains
are in accordance with the NEC/CEC.
N/A
Annex DVH
(DVH.3.2)
Terminals for permanent wiring, including
protective earthing terminals, are suitable for
U.S./Canadian wire gauge sizes, rated 125
percent of the equipment rating, and are
specially marked when specified.
N/A
Annex DVH
(DVH.3.2)
Wire binding screws are not permitted to attach
conductors larger than 10 AWG (5.3 mm
2
).
N/A
Annex DVH
(DVH.4)
Permanently connected equipment is required
to have a suitable wiring compartment and wire
bending space.
N/A
Annex DVH
(DVH 5.5)
Equipment connected to a centralized d.c.
power system, and having one pole of the DC
mains input terminal connected to the main
protective earthing terminal in the equipment,
complies with special earthing, wiring, marking
and installation instruction requirements.
N/A
Annex DVI
(6.7 )
Equipment intended for connection to
telecommunication network outside plant cable
is required to be protected against overvoltage
from power line crosses.
N/A
Annex DVJ
(10.6.1 )
Equipment connected to a telecommunication
and cable distribution networks and supplied
with an earphone intended to be held against, or
in the ear is required to comply with special
acoustic pressure requirements.
N/A