Safety Information
Page 34 of 57 Report No.: LCS210301193AS
IEC 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1D
Shenzhen LCS Compliance Testing Laboratory Ltd.
Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District, Shenzhen,
Guangdong, China
Tel: +(86) 0755-8259 1330 | Fax:+(86) 0755-8259 1332 | E-mail:webmaster@lcs-cert.com | http:// www.lcs-cert.com
Samples, material ............................................... :
Wall thickness (mm) ............................................ :
Conditioning (C) ................................................. :
Test flame according to IEC 60695-11-5 with
conditions as set out
N/A
Test specimen does not show any additional hole
N/A
S.3
Flammability test for the bottom of a fire
enclosure
N/A
Samples, material ............................................... :
Wall thickness (mm) ............................................ :
Cheesecloth did not ignite
N/A
S.4
Flammability classification of materials
N/A
S.5
Flammability test for fire enclosure materials of
equipment with a steady-state power exceeding
4000 W
N/A
Samples, material ............................................... :
Wall thickness (mm) ............................................ :
Conditioning (test condition), (C) ....................... :
Test flame according to IEC 60695-11-20 with
conditions as set out
N/A
After every test specimen was not consumed
completely
N/A
After fifth flame application, flame extinguished
within 1 min
N/A
T
MECHANICAL STRENGTH TESTS
P
T.1
General requirements
P
T.2
Steady force test, 10 N ....................................... :
(See appended table T.2)
P
T.3
Steady force test, 30 N ....................................... :
N/A
T.4
Steady force test, 100 N ..................................... :
(See appended table T.4)
P
T.5
Steady force test, 250 N ..................................... :
N/A
T.6
Enclosure impact test
N/A
Fall test
N/A
Swing test
N/A
T.7
Drop test ............................................................. :
(See appended table T.7)
P
T.8
Stress relief test .................................................. :
(See appended table T.8)
P
T.9
Impact Test (glass)
N/A










