Safety Information

Page 33 of 57 Report No.: LCS210301193AS
IEC 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1D
Shenzhen LCS Compliance Testing Laboratory Ltd.
Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District, Shenzhen,
Guangdong, China
Tel: +(86) 0755-8259 1330 | Fax：+(86) 0755-8259 1332 | E-mail：[e-mail] | http:// www.lcs-cert.com
Tc (°C) ................................................................. :

Tr (°C) ................................................................. :

Ta (°C) ................................................................. :

P.4.2 b)
Abrasion testing ................................................. :
N/A
P.4.2 c)
Mechanical strength testing ................................. :
N/A
Q
CIRCUITS INTENDED FOR INTERCONNECTION WITH BUILDING WIRING
P
Q.1
Limited power sources
P
Q.1.1 a)
Inherently limited output
N/A
Q.1.1 b)
Impedance limited output
P
- Regulating network limited output under normal
operating and simulated single fault condition
P
Q.1.1 c)
Overcurrent protective device limited output
N/A
Q.1.1 d)
IC current limiter complying with G.9
N/A
Q.1.2
Compliance and test method
P
Q.2
Test for external circuits – paired conductor cable
N/A
Maximum output current (A) ............................... :

Current limiting method ........................................ :

R
LIMITED SHORT CIRCUIT TEST
N/A
R.1
General requirements
N/A
R.2
Determination of the overcurrent protective
device and circuit
N/A
R.3
Test method Supply voltage (V) and short-circuit
current (A)). ...................................................... :
N/A
S
TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
S.1
Flammability test for fire enclosures and fire
barrier materials of equipment where the steady
state power does not exceed 4 000 W
N/A
Samples, material ............................................... :

Wall thickness (mm) ............................................ :

Conditioning (C) ................................................. :

Test flame according to IEC 60695-11-5 with
conditions as set out
N/A
- Material not consumed completely
N/A
- Material extinguishes within 30s
N/A
- No burning of layer or wrapping tissue
N/A
S.2
Flammability test for fire enclosure and fire barrier
integrity
N/A