Safety Information

Page 32 of 57 Report No.: LCS210301193AS
IEC 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1D
Shenzhen LCS Compliance Testing Laboratory Ltd.
Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District, Shenzhen,
Guangdong, China
Tel: +(86) 0755-8259 1330 | Fax：+(86) 0755-8259 1332 | E-mail：[e-mail] | http:// www.lcs-cert.com
M.8.1
General requirements
N/A
M.8.2
Test method
N/A
M.8.2.1
General requirements
N/A
M.8.2.2
Estimation of hypothetical volume Vz (m
3
/s) ....... :

M.8.2.3
Correction factors ................................................ :

M.8.2.4
Calculation of distance d (mm) .......................... :

M.9
Preventing electrolyte spillage
N/A
M.9.1
Protection from electrolyte spillage
N/A
M.9.2
Tray for preventing electrolyte spillage
N/A
M.10
Instructions to prevent reasonably foreseeable
misuse (Determination of compliance: inspection,
data review; or abnormal testing) ....................... :
N/A
N
ELECTROCHEMICAL POTENTIALS
N/A
Metal(s) used ...................................................... :
Pollution degree considered

O
MEASUREMENT OF CREEPAGE DISTANCES AND CLEARANCES
N/A
Figures O.1 to O.20 of this Annex applied .......... :

P
SAFEGUARDS AGAINST ENTRY OF FOREIGN OBJECTS AND SPILLAGE OF
INTERNAL LIQUIDS
N/A
P.1
General requirements
N/A
P.2.2
Safeguards against entry of foreign object
N/A
Location and Dimensions (mm) ......................... :

P.2.3
Safeguard against the consequences of entry of
foreign object
N/A
P.2.3.1
Safeguards against the entry of a foreign object
N/A
Openings in transportable equipment
N/A
Transportable equipment with metalized plastic
parts .................................................................... :
N/A
P.2.3.2
Openings in transportable equipment in relation
to metallized parts of a barrier or enclosure
(identification of supplementary safeguard) ....... :
no part shall become a PIS
N/A
P.3
Safeguards against spillage of internal liquids
N/A
P.3.1
General requirements
N/A
P.3.2
Determination of spillage consequences
N/A
P.3.3
Spillage safeguards
N/A
P.3.4
Safeguards effectiveness
N/A
P.4
Metallized coatings and adhesive securing parts
N/A
P.4.2 a)
Conditioning testing
N/A