Safety Information

Page 29 of 57 Report No.: LCS210301193AS
IEC 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1D
Shenzhen LCS Compliance Testing Laboratory Ltd.
Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District, Shenzhen,
Guangdong, China
Tel: +(86) 0755-8259 1330 | Fax：+(86) 0755-8259 1332 | E-mail：[e-mail] | http:// www.lcs-cert.com
G.15.3.2
Creep resistance test
N/A
G.15.3.3
Tubing and fittings compatibility test
N/A
G.15.3.4
Vibration test
N/A
G.15.3.5
Thermal cycling test
N/A
G.15.3.6
Force test
N/A
G.15.4
Compliance
N/A
G.16
IC including capacitor discharge function (ICX)
N/A
a)
Humidity treatment in accordance with sc 5.4.8 –
120 hours
N/A
b)
Impulse test using circuit 2 with Uc = to transient
voltage ................................................................ :
N/A
C1)
Application of ac voltage at 110% of rated voltage
for 2.5 minutes
N/A
C2)
Test voltage ........................................................ :

D1)
10,000 cycles on and off using capacitor with
smallest capacitance resistor with largest
resistance specified by manufacturer
N/A
D2)
Capacitance ....................................................... :

D3)
Resistance .......................................................... :

H
CRITERIA FOR TELEPHONE RINGING SIGNALS
N/A
H.1
General
N/A
H.2
Method A
N/A
H.3
Method B
N/A
H.3.1
Ringing signal
N/A
H.3.1.1
Frequency (Hz) ................................................... :

H.3.1.2
Voltage (V) ......................................................... :

H.3.1.3
Cadence; time (s) and voltage (V) ..................... :

H.3.1.4
Single fault current (Ma): ..................................... :

H.3.2
Tripping device and monitoring voltage .............. :
N/A
H.3.2.1
Conditions for use of a tripping device or a
monitoring voltage complied with
N/A
H.3.2.2
Tripping device
N/A
H.3.2.3
Monitoring voltage (V) ......................................... :

J
INSULATED WINDING WIRES FOR USE WITHOUT INTERLEAVED INSULATION
N/A
General requirements
N/A
K
SAFETY INTERLOCKS
N/A
K.1
General requirements
N/A