Safety Information
Page 19 of 57 Report No.: LCS210301193AS
IEC 62368-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC62368_1D
Shenzhen LCS Compliance Testing Laboratory Ltd.
Add: Room 101, 201, Building A and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District, Shenzhen,
Guangdong, China
Tel: +(86) 0755-8259 1330 | Fax：+(86) 0755-8259 1332 | E-mail：webmaster@lcs-cert.com | http:// www.lcs-cert.com
8.10.6
Thermoplastic temperature stability (C) ................ :
N/A
8.11
Mounting means for rack mounted equipment
N/A
8.11.1
General
N/A
8.11.2
Product Classification
N/A
8.11.3
Mechanical strength test, variable N .................... :
N/A
8.11.4
Mechanical strength test 250N, including end stops
N/A
8.12
Telescoping or rod antennas .................................
N/A
Button/Ball diameter (mm) ..................................... :
9
THERMAL BURN INJURY
P
9.2
Thermal energy source classifications
TS1
P
9.3
Safeguard against thermal energy sources
P
9.4
Requirements for safeguards
P
9.4.1
Equipment safeguard
Equipment safeguard
P
9.4.2
Instructional safeguard ........................................... :
N/A
10
RADIATION
P
10.2
Radiation energy source classification
P
10.2.1
General classification
P
10.3
Protection against laser radiation
N/A
Laser radiation that exists in the equipment:
Normal, abnormal, single-fault............................. :
N/A
Instructional safeguard ........................................ :
Tool ...................................................................... :
10.4
Protection against visible, infrared, and UV
radiation
P
10.4.1
General
P
10.4.1.a)
RS3 for Ordinary and instructed persons ............ :
N/A
10.4.1.b)
RS3 accessible to a skilled person ...................... :
N/A
Personal safeguard (PPE) instructional
safeguard ............................................................. :
10.4.1.c)
Equipment visible, IR, UV does not exceed RS1 . :
N/A
10.4.1.d)
Normal, abnormal, single-fault conditions ......... :
N/A
10.4.1.e)
Enclosure material employed as safeguard is
opaque ................................................................. :
N/A