User Guide

Table Of Contents

Network PTZ Camera·Quick Start Guide

5.2 Hik-Connect Setup

Steps:

1. Download and install the Hik-Connect app by searching

“Hik-Connect” in App Store or Google Play

2. Launch the app and register for a Hik-Connect user account.

3. Log in Hik-Connect app after registration.

5.3 Adding Camera to Hik-Connect

Before you start:

You need to enable the Hik-Connect service on camera before adding

it to your Hik-Connect account. Refer to section 5.1 Enable

Hik-Connect Service on Camera.

Steps:

1. Use a network cable to connect the camera with a router if the

camera does not support Wi-Fi.

Figure 5-3 Connect a Router

Note:

After the camera connects to the network, wait one minute before

any operation on the camera using Hik-Connect app.

2. In the Hik-Connect app, tap “+” on the upper-right corner and

then scan the QR code of the camera to add the camera.