Application Guide

Data Sheet
Technical Specification
Model
EOC
-Transmitter/Receiver
Function Port
1*10/100 Mbps Base
-TX
1*BNC
Power Consumption
<2W
Transmission Bandwidth
RG59 coaxial cable:
400m/100Mbps, 1000m/10Mbps
PoE Protocol
IEEE802.3af, IEEE802.3at
Network Standard
IEEE802.3(x), IEEE802.3u,
Lightning Protection
Common Mode 4KV
Differential Mode 2KV
Operating Temperature
-
30°C to 65°C (-22 °F to 149 °F
)
Operating Humidity
5%~95%
Weight
(each)
61g
(0.134lbs)
Dimension (W
×D×H)
79mm
×52mm×23mm
(
3.1” x 2.0” x 0.9”)
• This chart is based on regular RG59 coaxial cable and
powered by standard DC48V POE injectors.
• This EOC converter can transmit up to 100Mbps
network data and load max 11W POE device in 300
meters (or 1,000ft).
• The network bandwidth will be automatically lowered
to 10Mbs over 1,000ft and the max transmission
distance is 3,280ft. This bandwidth is still sufficient for
single 4K IP camera.
• The performance will be better when using RG6
cable or DC53V POE injectors.
Transmission Distance Performance
100m
(330ft)
Bandwidth 100 Mbps
Load Capacity 21W
300m
(1,000ft)
Bandwidth 100 Mbps
Load Capacity 11W
1,000m
(3,280ft)
Bandwidth 10 Mbps
Load Capacity 4W
Transmission Performance
Panel View
S N Interface Note
1 PoE OUT To connect POE device (IPC, VoIP, AP, etc)
2 PoE IN To connect POE injector, POE switch, or POE NVR
3
Link
BNC port Link indicator light
4
PWR
Power
indicator light
5
Long Reach
Coaxial
cable port
EOC Transmitter
EOC Receiver