Application Guide

EOC (Ethernet Over Coax, also known as IP over Coax) Converter is used to transmit Video & Audio & Data
over existing coaxial cables or twist pair cables. Features with POE & IP data transmission and passive design,
LINOVISION EOC converter is designed to upgrade traditional analogue video surveillance system to IP
surveillance system without replacing coaxial cables. It is working with POE IP cameras, POE Wi-Fi AP, VoIP
phones, etc.
2020 Updated Version
POE IPC
EOC Transmitter
EOC Receiver
POE NVR
Or POE Switch
Power adaptor
Coax cable
Max 1000m (3000ft)
CAT5E/6
Power + Data
CAT5E/6
Power + Data
Introduction
The 2020 version EOC converter supports POE IP data transmission over twist pair cable, such as Cat5E/Cat6
cable, power line, RS485 cable, etc. BNC to Twist pair connectors are required in this connection. This
function is widely used in elevator application.
POE IPC
EOC Transmitter EOC Receiver
POE NVR
Or POE Switch
Twist Pair cable
CAT5E/6
Power + Data
CAT5E/6
Power + Data
Power adaptor
• EOC transmitter has to be connected to POE device (IPC/VoIP), and EOC receiver is connected
to POE injectors. The reverse connection will not work.
• It is used for point-to-point coax cable direct connection only, no BNC repeater/T-connect/splitter in
the middle.
Package Includes
1* EoC Transmitter 1* EoC Receiver
2* Screw Bag 2* BNC to Twist Pair Connector
Dimension
Transmitter and receiver are alike:
79mm×52mm×23mm (Each)
(3.1” x 2.0” x 0.9”)
User’s Manual