POE IP Over Coax Converter
Introduction EOC (Ethernet Over Coax, also known as IP over Coax) Converter is used to transmit Video & Audio & Data over existing coaxial cables or twist pair cables. Features with POE & IP data transmission and passive design, LINOVISION EOC converter is designed to upgrade traditional analogue video surveillance system to IP surveillance system without replacing coaxial cables. It is working with POE IP cameras, POE Wi-Fi AP, VoIP phones, etc.
Panel View EOC Transmitter SN EOC Receiver Interface Note 1 PoE OUT To connect POE device (IPC, VoIP, AP, etc) 2 PoE IN To connect POE injector, POE switch, or POE NVR 3 Link BNC port Link indicator light 4 PWR Power indicator light 5 Long Reach Coaxial cable port Transmission Performance Data Sheet Technical Specification Transmission Distance Model EOC-Transmitter/Receiver Function Port 1*10/100 Mbps Base-TX 1*BNC Power Consumption <2W Transmission Bandwidth RG59 coaxial cable
Applications 1. Upgrade traditional analogue system to IP surveillance system while using existing coaxial cable(RG59 cable) EOC Transmitter POE IPC EOC Receiver POE NVR Or POE Switch Power adaptor 2. Remote network & power transmission for POE compatible devices over coaxial cable WiFi AP (PoE enabled) OR EOC Transmitter PoE Switch EOC Receiver Power adaptor VoIP Phone (PoE enabled) 3.
Applications 4. For many elevators there are no ethernet cables and no camera powers in the elevator cart, LINOVISION EOC converters is perfect for this application. It can transmit POE power and IP data over coaxial or twist pair cable. One passive EOC-transmitter will be put inside the elevator cart to feed camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR.
FAQ Related Q1:Can multiple devices be connected via single coaxial cable? A:Yes, one pair of EOC converter can be used to transmit multiple device over single coaxial cable with NVR/POE switch/WI-FI AP. The connection will be multiple device -> NVR/POE switch/WI-FI AP > EOC Transmitter -> Coaxial cable ->EOC Receiver -> POE NVR/POE Switch/POE Injector with internet. Please note that the EOC receiver has to be connected to an POE NVR or POE Switch to be powered.
FAQ Related Q7: Why my POE device is offline when working with our EOC (IP Over Coax) Converter? A: Several main reasons are as follow: 1. EOC transmitter has to be connected to POE device (IPC/VoIP), and EOC receiver is connected to POE supply device (POE NVR, POE Switch or POE Injector). The reverse connection will not work. 2. It is used for point-to-point coax cable direct connection only, no BNC repeater/Tconnect/splitter in the middle. 3. It may be caused by insufficient load capacity.
Coax cable Max 1000m (3000ft) EOC Receiver EOC-TP Power adaptor CAT5E/6 CAT5E/6 Power + Data Power + Data POE IPC POE NVR Or POE Switch
Related Products – EOC-TP (Water-proof Transmitter) EOC-TP Outstanding Features • • • • • Application IP Video & Audio & Data & POE Power transmission over coaxial cable IP68 waterproof standard, full mental housing Max 1000 meters (3000ft) transmission Up to 100Mbps bandwidth over 1,000 feet regular coax cable transmission, working with CCA/CCU RG59/RG6 cable Plug-and-play, configuration free.
Related Products – 4ch Industrial POE & EOC Hybrid Switch EOC-Switch04 Outstanding Features • • • • • Layer-2 industrial POE switch, Supports IEEE802.3af, IEEE802.3at, Hi-PoE standard 4ch POE IP over Coax ports plus 1 GE uplink and 1 SFP fiber port Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.
Related Product – 16ch Industrial POE & EOC Hybrid Switch EOC-Switch16 Outstanding Features • • • • • • Application Layer-two web managed PoE switch Port 1-8 support three self-adaptive transmission modes which are IEEE, E100 and E10 Port 1-8 support both twisted-pair transmission and coaxial cable transmission Support web management: port management, 802.1Q VLAN, STP/RSTP, LACP, 802.1X, QoS Support PoE management, Green PoE, Legacy Support(Total power budget 240W) Conform IEEE802.3, IEEE802.3u, IEEE802.
Related Product – 24ch Industrial POE & EOC Hybrid Switch EOC-Switch24 Outstanding Features Application 24 ports Industrial POE switch with 2 ports GE unlinks First 8 ports support both POE and EOC IP Over Coax transmission, max 3000ft data and POE transmission distance. Layer-two web management, POE port management, VLAN, STP/RSTP, QOS, etc.