User Guide

1
Lock Tutorial
In the factory mode (before pairing), the Passcode to unlock is * 1234567890 #
Default factory Passcode
Before proceeding, turn on your Bluetooth and ensure that you are within Bluetooth range
of the lock.
Setting Master Passcode
2
New passcodes can be added from
Adding new Passcode
3
- on TTLock App
- on Deadbolt Keypad
22
*To activate, unlock once with the passcode. If unactivated within this period of time, the
passcode will become invalid.
1. Lock Management > Setting > Admin Passcode
2. If prompted, enter your account password and tap OK.
3. Set admin passcode and save (this is your Master Passcode).
Lock Management > “Send Passcode” > Select the passcode type from the top bar
Passcode
Type
Description Steps
Activate
within*
One-time
Single-use, short term passcode
*Must be used within 6 hours
Tap Generate 6 hours
Permanent General use passcode Tap Generate 24 hours
Timed Passcode with set time frame
Set Active and Expire times >
Generate
24 hours
Cyclic Regularly occuring passcode
Set days > Set Active and
Expire times
> Generate
24 hours
Customized
Set your own passcode and
time frame
Set Active and Expire times >
Set Passcode
> Enter 4-9 digit passcode
* Must be done near the lock to
become active
24 hours
Erase
Generate new passcode while
deleting previous passcodes
Tap Generate 24 hours