Installation Sheet
Table Of Contents
This user manual will guide you through the function and usage of
the Command-S smart lock. Please read this manual carefully and
keep it in a secure place.
Consult this manual before you attempt to use the lock. If you
have questions not answered by this manual, please contact our
customer support.
Notes with this “ “ icon must be read, understood, and
followed to prevent any injury or damage.
!
1. This lock should only be used as described in this manual.
2. The lock’s factory default setting is unlocked. After providing
power, establishing an admin, and pairing the lock to the app,
will you be able to change the setting to “Private” mode.
3. The handle direction on the lock is not reversible. Please make
sure the direction of the lock handle is consistent with the
direction of the door.
4. There is a protective film on the front touch panel and handle.
This film can be removed whenever needed.
5. The device require four (4) AA batteries. Do not mix old and
new batteries. Never insert objects into the lock.
6. Verify the door surface is flat and level before you start the
installation process. Installation on doors or surfaces that are
not flat and/or level may cause the lock to malfunction or fail to
operate properly.
7. This smart lock is compatible with the app TTLock (available on
iOS and Android). The lock will function without the app, but
not all features will be accessible.
8. This lock must be installed on a door with a thickness between
35mm and 60mm.
!
1