Installation Sheet

Ensure the Bluetooth connection is sufficient. After connecting the phone to the door lock,
click " " to unlock. The phone must be within 16 feet of the door for this to work. The
door will always remain locked until unlocked or it is changed to the "Passage Mode".
On the app, a voice command will sound "unlock". If an error in the Bluetooth connection
occurs, the voice command will sound "Operation Failed". If an error in the connection
occurs, close the app and start over.
Passcodes can be used to unlock the door. Create a passcode by clicking "Generate
Passcode" on the app. The system will create a generic passcode that will need to be used
once before being able to change the code to something of you preference. To change the
code, click "Passcodes" and type your desired code then click "Ok". Passcodes can be
generated for permanent, limited-time, and single use.
Generate Passcode
anent Timed One-Time Erase Custom Recurri
Permanent
Start Time
2020-03-06 09:00
End Time
2020-03-06 09:00
TTLock
S31A
Touch to UnLock. Long Press to Lock
Passcodes
IC Cards
Authorized Admin
Records
Settings
Generate Passcode
Send eKey eKeys
13
BLUETOOTH MANAGEMENT
SETTING YOUR PASSCODE