Manualshelf

User's Guide Part 1

ManualsBrandsLINKSYS ManualsComputers & AccessoriesWireless USB Network Adapter
11121314151617181920
11
Chapter 5: Hardware Installation
Connecting the Adapter
Wireless-B USB Notebook Adapter
Chapter 5: Hardware Installation
Connecting the Adapter
1. The Adapter comes with the USB cable you will use to connect the Adapter to your PC.
Connect one end of the USB cable to the USB port of the Adapter.
Connect the other end of the USB cable to one of the USB ports on your computer.
Figure 5-2: The Adapter’s USB Port
Figure 5-1: How the Adapter connects to your PC
Figure 5-3: A PC’s USB port
NOTE: Windows XP Users. You must install the Adapter’s hardware before
installing the software.
NOTE: Windows 98SE, Me, and 2000 users. You must run the Setup Wizard
to install the software before installing the hardware.