Quick Start Manual

Setup for Windows XP or 2000

WPA-Personal Needed for Connection

Select your encryption method and 1.

enter a Pre-shared Key.

Encryption Select the encryption

method of your wireless network,

TKIP or AES.

Pre-shared Key Enter the Pre-

shared Key of your wireless

network. It must have 8-63

characters.

Click 2. Connect and go to step C.

WEP Needed for Connection

Select the level of encryption, and 1.

then enter the Passphrase or WEP

Key.

WEP Select the level of encryption,

64-bit or 128-bit.

Passphrase Enter the Passphrase

of your wireless network. It is case-

sensitive and must have 16 or fewer

alphanumeric characters.

WEP Key Enter the WEP Key of

your wireless network. For 64-bit

encryption, enter 10 hexadecimal

characters (“0” to “9” and “A” to “F”).

For 128-bit encryption, enter 26

hexadecimal characters.

Click 2. Connect and go to step C.

WPA-Personal Needed for Connection

WEP Key Needed for Connection

On the C. Congratulations screen, click

Finish.

The D. Link Information screen of the

Wireless Network Monitor appears

the first time you run the Setup

Wizard. To exit the Monitor, click the

X in the upper right corner.

NOTE: After the Adapter is installed, the Wireless Network

Monitor screen opens, and its icon appears in your computer’s

system tray. You can double-click the icon to open the Monitor

if you want to find available wireless networks or change the

Adapter’s configuration. For detailed information on the Monitor,

refer to the User Guide on the CD-ROM.

Congratulations! Setup is complete.

Congratulations

Connected to Network